Chapter 72

Pig Iron and Spiegeleisen

HS code 7201 covers pig iron and spiegeleisen in primary forms such as pigs or blocks, used as raw material for steel and iron foundries.

Ferro-alloys in Primary Forms

HS code 7202 covers primary ferro-alloys used in metallurgy to add specific elements like manganese or silicon to steel, typically in lumps, grains, or powder.

Sponge Iron and Purity Iron Products

HS code 7203 is used for direct reduced iron (sponge iron) and high-purity iron (>99.94%) in lumps or pellets used as feedstocks for steel production.

Ferrous Waste and Scrap Metal

HS code 7204 covers ferrous waste, scrap metal, and remelting scrap ingots of iron or steel intended for recycling and metallurgical processing.

Iron and Steel Granules and Powders

HS code 7205 is for granules and powders derived from pig iron, spiegeleisen, or steel, used in powder metallurgy and chemical manufacturing.

Iron and Non-Alloy Steel Ingots

HS code 7206 covers iron and non-alloy steel in primary forms like ingots or large cast blocks, excluding sponge iron products.

Semi-finished Iron or Steel Products

HS code 7207 covers semi-finished products of iron or non-alloy steel, such as billets, slabs, and blooms, intended for further processing.

Hot-rolled Flat Steel (Width >600mm)

HS code 7208 is for flat-rolled iron or non-alloy steel over 600mm wide, hot-rolled and neither clad nor coated, typically in coils or sheets.

Cold-rolled Flat Steel (Width >600mm)

HS code 7209 covers flat-rolled iron or non-alloy steel over 600mm wide, cold-rolled and not further worked, providing superior finish for precision uses.

Plated or Coated Flat Steel (>600mm)

HS code 7210 covers flat-rolled iron or non-alloy steel over 600mm wide that has been clad, plated, or coated with metal or plastic.

Narrow Flat-rolled Steel (<600mm)

HS code 7211 covers flat-rolled iron or non-alloy steel less than 600mm wide, not clad or coated, available in hot or cold-rolled finishes.

Narrow Flat-Rolled Coated Iron or Non-Alloy Steel

HS code 7212 covers flat-rolled products of iron or non-alloy steel, less than 600mm wide, which are clad, plated, or coated to prevent corrosion or for aesthet

Hot-Rolled Iron or Non-Alloy Steel Rods in Coils

HS code 7213 covers hot-rolled bars and rods of iron or non-alloy steel in irregularly wound coils, typically used as wire rod for further industrial drawing.

Forged or Hot-Rolled Iron or Non-Alloy Steel Bars

HS code 7214 is for iron or non-alloy steel bars and rods, not further worked than forged, hot-rolled, or hot-extruded, including those twisted after rolling.

Cold-Finished or Other Iron and Non-Alloy Steel Bars

HS code 7215 covers bars and rods of iron or non-alloy steel not covered elsewhere in Chapter 72, primarily those cold-formed or cold-finished.

Iron or Non-Alloy Steel Angles, Shapes and Sections

HS code 7216 covers angles, shapes, and sections of iron or non-alloy steel, such as U, I, H, L, and T sections, used primarily in construction.

Iron or Non-Alloy Steel Wire

HS code 7217 covers wire of iron or non-alloy steel, whether or not polished, coated, or plated, excluding stranded wire or cables.

Stainless Steel Ingots and Semi-Finished Products

HS code 7218 covers stainless steel in ingots or other primary forms and semi-finished products like billets, slabs, and blooms.

Wide Flat-Rolled Stainless Steel (600mm or more)

HS code 7219 covers flat-rolled stainless steel products with a width of 600mm or more, including both hot-rolled and cold-rolled coils or sheets.

Narrow Flat-Rolled Stainless Steel (<600mm)

HS code 7220 covers flat-rolled stainless steel products with a width of less than 600mm, whether in coils or cut lengths.

Hot-Rolled Stainless Steel Rods in Coils

HS code 7221 encompasses bars and rods of stainless steel, hot-rolled and in irregularly wound coils, used primarily for downstream manufacturing.

Stainless Steel Bars, Rods, Angles and Sections

HS code 7222 covers stainless steel bars, rods, angles, and sections used in structural engineering and manufacturing where high corrosion resistance is require

Stainless Steel Wire

HS code 7223 is for stainless steel wire in coils, produced by cold-drawing, commonly used for industrial spring manufacture and wire mesh production.

Alloy Steel Ingots and Semi-Finished Products

HS code 7224 encompasses other alloy steel in primary forms like ingots and semi-finished products such as billets, slabs, and blooms for further rolling.

Large Flat-Rolled Alloy Steel Products

HS code 7225 covers flat-rolled products of other alloy steel with a width of 600mm or more, including hot-rolled and cold-rolled plates or coils.

Narrow Flat-Rolled Alloy Steel Products

HS code 7226 is used for flat-rolled products of other alloy steel with a width of less than 600mm, typically in the form of strips or hoops.

Alloy Steel Hot-Rolled Bars and Rods in Coils

HS code 7227 covers other alloy steel bars and rods, hot-rolled, in irregularly wound coils, widely used as wire rods in the fastener industry.

Other Alloy Steel Bars, Shapes and Hollow Drill Bars

HS code 7228 covers other alloy steel bars and rods (straight), angles, shapes, sections, and hollow drill bars of alloy or non-alloy steel.

Alloy Steel Wire

HS code 7229 encompasses wire of other alloy steel (non-stainless), cold-drawn and in coils, used for heavy-duty spring and cable manufacturing.